VPA-H200F
Standard Model
The standard model is a high-speed peel tester that applies to larger sample sizes due to its specimen stage and long stage travel distance.
Features:
- Available load cell units ranging from 0.1N to 100 N rated capacity (full scale)
- Measurements of peel strength as low as 0.001 N are possible
- Peel area of max. 40 x 200 mm
- Stage travel distance of 200 mm
- Analysis of peel strength dependent on peel angle and peel speed
- Peel angles between 0 and 180°
- Peel rates from 3 to 30000 mm/min
- Dimension of the instrument (WxDxH): 910 x 550 x 270mm
VPA-H100F
Compact Model
The compact model can accommodate the same unit cell units and features and provides the same functions as the standard model but is limited in terms of maximum peel rate, stage travel distance, and suitable sample size.
Features:
- Available load cell units ranging from 0.1 N to 100 N rated capacity (full scale)
- Measurements of peel strength as low as 0.001 N are possible
- Peel area of max. 40 x 100 mm
- Stage travel distance of 100 mm
- Analysis of peel strength dependent on peel angle and peel speed
- Peel angles between 0 and 180°
- Peel rates from 3 to 12000 mm/min
- Dimension of the instrument (WxDxH): 620 x 400 x 270mm