LabRAM Odyssey, a fully automated and remotely controllable system.
The LabRAM Odyssey Raman microscopes are ideally suited for both micro and macro measurements, and offer advanced confocal imaging capabilities in 2D and 3D. The true confocal Raman microscope enables the most detailed images and analyses to be obtained with speed and confidence. With guaranteed high performance and intuitive simplicity, the LabRAM Odyssey is the ultimate instrument for Raman spectroscopy. It is widely used for standard Raman analysis, PhotoLuminescence (PL), Tip Enhanced Raman Spectroscopy (TERS) and other hybrid methods.
Move from microscopy to the nanoscopy world with an easy AFM upgrade.
30 years of LabRAM history heritage
The LabRAM Odyssey is the latest addition to the LabRAM family. In 1993, Jobin-Yvon introduced the LabRAM system which was the first bench-top Raman microscope with a single monochromator. In 1997, the LabRAM HR system was launched featuring higher performance. With more than 2000 LabRAM HR systems sold globally, the LabRAM Odyssey leverages this strong experience in Raman microspectrometry.
LabRAM™ Odyssey: Get full Raman microscope power
High Spectral and Spatial Resolution
The LabRAM Odyssey high throughput 800 mm single stage optimized spectrometer combines high sensitivity with high spectral and spatial resolution.
High quality and optimized design is essential to provide accurate results to study all kinds of samples.
Don’t miss any information on the sample!
With state-of-the-art notch and bandpass filters, access frequencies down to 5 cm-1* on the LabRAM Odyssey and obtain ultra-low frequency spectral data.
*Depending on excitation wavelength, specification < 10 cm-1 at 532 nm, 633 nm and 785 nm
Advanced, yet easy to use intuitive software and automation
Combined with the LabSpec 6 software’s intuitive interface, LabRAM Odyssey lets you use the full power of the system to obtain the best possible result. The large dedicated application range in the LabSpec 6 app store makes it possible to configure the software to suit and evolve to your specific needs.
LabRAM Odyssey offers high level of automation like a laser switch, an automated objective turret or an automated spatial calibration with its VRM patented function.
From deep UV to NIR without compromise
The LabRAM Odyssey achieves a fully achromatic spectrometer spectral range from 200 nm to 2200 nm.
The availability of excitation lasers from deep UV to near IR measures both photoluminescence and Raman signals in the same spectrum.
Ultra flexible platform
The design of the LabRAM Odyssey open space microscope makes it a true calable system able to integrate various additional modules like large cryostats, broad travel range stages, etc.
The inverted microscope option allows you to illuminate the sample from below and gives you more free space on the top of the sample.
LabRAM Odyssey can also perform remote measurements with the SuperHead fiber optic probe.
Push the frontiers from microRaman to NanoRaman
The LabRAM Odyssey can be coupled with the HORIBA AFM to achieve NanoRaman (TERS) high performance down to a 10 nm resolution.
The LabRAM Odyssey can also integrateour patented nanoGPSTM navYX function to achieve a full collaborative characterization with various other microscopy modalities like SEM, FTIR, and others.
If you’d like to know more about the LabRAM Odyssey, its hyphenated techniques, and its application in your industry or field of research.