Select Page

Bio-Logic is offering a complete range of potentiostat / galvanostat: Single-channel potentiostat / galvanostat, Bi-potentiostat / galvanostat, Multichannel potentiostat / galvanostat 16 electrochemical cells (batteries, super-capacitors) in parallel to increase the throughput of the research.

Electrochemical Impedance Spectroscopy (EIS) is available as option for each instrument. It is managed by a built-in Frequency Response Analyzer (FRA).

SP-150 Single Channel Potentiostat

Comes with a full featured economical research grade potentiostat. With its modular chassis, this instrument can be customized to address all applications in the area of classical electrochemistry.

The SP-150 potentiostat/galvanostat can be configured at point of purchase to include an EIS-capable module, and a low current option (1 nA full scale range). It can also be connected to external high current boosters (2, 5, 10, 20, 80 and 100 A)

SP-300 Two Channel Potentiostat

The SP-300 is a state-of-the-art research grade potentiostat/galvanostat featuring a range of 500 mA to 10 A ,built-in EIS and high-end specifications such as 7 MHz max frequency, floating mode, analog filtering, built-in calibration board, and stability bandwidths.

The SP-300’s modular chassis can integrate an optional high current/high voltage option board (up to 10 A & and up to 48 V), or alternatively, a second potentiostat board (either standard or EIS) to be used as a Bipotentiostat to carry out RRDE experiments. The instrument can also be used as a multiple user system as two different researchers can use each channel board independently.

VSP-300 multichannel potentiostat / galvanostat

A versatile instrument offering 6 slots to set from 1 to 6 channel boards. Each channel board can accommodate an Ultra Low Current cable and can be associated with one or several high current booster kits. Up to 4 booster boards can be plugged in parallel in one VSP-300 chassis

Each channel board can accommodate an ultra-Low current cable and can be connected to one of several high current booster kits. Up to 4 booster boards can be plugged in parallel in one VSP-300 chassis. The instrument can reach up to 40 A.

Four booster kits are available: ±10 A/ [-1;6] V, ±4 A/ [-3;14] V, ±2 A/ ±30 V and ±1 A/±48 V. Each channel board can be equipped with an Analog Ramp Generator.

Perfect for group work, the VSP-300 can be connected to a LAN and controlled independently by several users.

VMP300 16-channel research grade workstation

With its modular chassis design, up to 16 independent potentiostat channels can be installed. The VMP300 can be equipped with additional capabilities, including low current measurement, impedance and high current via plug-in modules.

Each potentiostat installed in the VMP3 can be connected to an external high current booster channel, making it ideal for battery research and testing

All multichannel potentiostat/galvanostats are built on a multiple-user system which allows several computers to be connected to the unit at the same time via a LAN network.