Select Page

Moku:Lab

Moku:Lab 

Couples high-speed analog inputs and outputs to fast reconfigurable digital signal processing. Moku:Lab can measure, record and generate signals from DC to 200 MHz.

 

 

Specifications Summary 

2 Channel Analog Inputs

  • 500 MS/s, 12-bit ADC’s
  • 200 MHz bandwidth (-3dB)
  • 1 Vpp/ 10 Vpp voltage range
  • 50Ω / 1MΩ impedance
  • AC/DC coupling
  • External trigger (BNC,TTL)
2 Channel Analog Out
  • 1GS/s, 16-bit DACs
  • 200 MHz frequency (>300MHz analog bandwidth)
  • 2 Vpp
  • 50 Ω impedance
  • DC coupled
Clocks
  • Ultra-stable oscillator (accuracy < 500 ppb)
  • 10 MHz reference input
  • 10 MHz reference output
Connectivity and Storage
  • Wi-fi
  • Ethernet
  • SD Card slot with 8 GB SD Card
  • iPad charging port via USB

 
 

 

 

 

 Inputs and Outputs

With DC-coupled, low noise analog inputs and outputs (2 channels of each), you can measure and generate signals from a single device.

Analog Inputs: Moku:Lab’s DC to 200 MHz inputs can be switched between 50Ω/1MΩ and AC/DC coupling. For optimizing dynamic range, The 500 MS/s 12-bit ADCs are coupled to an analog front end featuring two gain ranges (± 5 V and ±0.5 V) switchable via iPad

Analog Outputs: Moku:Lab outputs can drive a  50 Ω load with 2 Vpp at frequencies up to 200 MHz. The 16-bit DACs coupled with custom-designed output conditioning produce extremely precise signals.
 
  Made for iPad

With DC-coupled, low noise analog inputs and outputs (2 channels of each), you can measure and generate signals from a single device. The iPad is the perfect partner for Moku:Lab. The slot in the top of Moku:Lab provides a solid stand for your iPad. The slot is also a great place to leave your lab’s iPad at the end of the day so you always know where to find it when you return. Moku:Lab’s back panel has a full-sized USB port just for charging your device, so it will be juiced up when you need it.